Rod-End Bearings For Captive-Guided Position Transducers

Picture of transducer wirh bearings fitted

Rod-end bearings can be used with captive type transducers where there may be some mis-alignment

They should not be used horizontally if the transducer range is greater than ±100mm. For ranges larger than this you may wish to consider using our Mounting block

Bearings drawing
Type Thread L ID OD L2 TA
BRG1000 M5x0.8, 14mm 27mm 4.987mm to 5.064mm 16mm 8mm 11degrees
BRG1001 M5x0.8, 20mm 33mm 4.987mm to 5.064mm 16mm 8mm 11degrees

Specification
Major construction material Plated low carbon steel
Operating temperature range -35°C to 170°C
Maximum radiation dose 8k Gy

All dimensions and specifications are nominal. www.rdpe.com/uk/brg.htm 20110317
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591
-