Model UG Tension/Compression Load Cell (Universal Load Cell)

Very high accuracy
Stainless steel
High Range
Infinite resolution



A load cell or force sensor is a device which converts load or force into an electrical signal.

A load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.

Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.

This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.


How it Works - Strain Gauge Load Cell

A  =  38mm
B  =  32mm
H2  =  0.8mm
Type Range D1 H Mounting thread D2 D3 H3
SLC-UG000100 100lbs (445N) 51mm 70mm 3/8-24 UNF, 11mm 16mm 48mm 2.3mm
SLC-UG000250 250lbs (1.1kN) 51mm 70mm 3/8-24 UNF, 11mm 16mm 48mm 2.3mm
SLC-UG000500 500lbs (2.2kN) 51mm 70mm 3/8-24 UNF, 11mm 16mm 48mm 2.3mm
SLC-UG001000 1000lbs (4.4kN) 64mm 105mm 1/2-20 UNF, 16mm 19mm 51mm 2.3mm
SLC-UG002000 2000lbs (9kN) 64mm 105mm 1/2-20 UNF, 16mm 19mm 51mm 2.3mm
SLC-UG003000 3000lbs (13kN) 64mm 105mm 1/2-20 UNF, 16mm 19mm 51mm 2.3mm
SLC-UG004000 4000lbs (18kN) 64mm 105mm 1/2-20 UNF, 16mm 19mm 51mm 2.3mm
SLC-UG005000 5000lbs (22kN) 89mm 149mm 1-14 UN, 29mm 40mm 76mm 4.8mm
SLC-UG007500 7500lbs (33kN) 89mm 149mm 1-14 UN, 29mm 40mm 76mm 4.8mm
SLC-UG010000 10000lbs (44kN) 89mm 149mm 1-14 UN, 29mm 40mm 76mm 4.8mm
SLC-UG015000 15000lbs (67kN) 127mm 216mm 1-1/2-12 UNF, 51mm 60mm 109mm 16.0mm
SLC-UG020000 20000lbs (89kN) 127mm 216mm 1-1/2-12 UNF, 51mm 60mm 109mm 16.0mm
SLC-UG030000 30000lbs (133kN) 127mm 216mm 1-1/2-12 UNF, 51mm 60mm 109mm 16.0mm
SLC-UG050000 50000lbs (222kN) 152mm 305mm 2-12 UN, 64mm 92mm 140mm 17.5mm
SLC-UG075000 75000lbs (334kN) 152mm 305mm 2-12 UN, 64mm 92mm 140mm 17.5mm
SLC-UG100000 100000lbs (445kN) 203mm 432mm 3-8 UN, 114mm 152mm 173mm 17.5mm
SLC-UG150000 150000lbs (667kN) 203mm 432mm 3-8 UN, 114mm 152mm 173mm 17.5mm
SLC-UG200000 200000lbs (890kN) 229mm 533mm 4-8 UN, 140mm 191mm 206mm 19.1mm

Specification

Excitation/supply (calibrated)10Vdc Operating temperature range (minimum) -34C
Output3mV/V Operating temperature range (maximum) 85C
Bridge resistance350 Ohms Compensated temperature range (minimum) 16C
Linearity error±0.03% F.S. Compensated temperature range (maximum) 71C
Hysteresis±0.03% F.S. Deflection at full scale 0.114mm
Repeatability±0.02% F.S. Creep 0.02% F.S. (20 minutes)
ResolutionInfinite Over-range capacity 50% F.S.
Temperature coefficient (zero)±0.0027% F.S. /C Major construction material stainless steel
Temperature coefficient (span)±0.0014% rdg /C Electrical termination Connector, mating part = MS3106A-14S-6S (or equivalent) (SEN1006)


Options and accessories

Electronics


All dimensions and specifications are nominal. www.rdpe.com/uk/slc-ug.htm 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591

-