RDP Home Page Banner

Model 34 Tension/Compression Universal Load Cell


Stainless steel
Infinite resolution
Miniature
image of Model  34  Tension/Compression Universal Load Cell
Our SLC34 load cell or force sensor is a device which converts load or force into an electrical signal.
Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC34 load sensor is not exposed to load or force in excess of its capability. The range of model SLC34 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
One particular feature of this transducer is its very small size
The SLC34 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC34 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Miniature tension compression load cell
Tension/compression load cells measure the force applied to the centre threads of the load cell.
dimensional drawing of  Model  34  Tension/Compression Universal Load Cell
The cable may contain an in-line circuit board which cannot be removed
CL1=0.6m (nominal)
CL4=25mm (nominal)
AF=3/8''
Mounting thread=1/4-28 UNF
Type Range D1 H L1 L2 A B Total weight
SLC34G1000 1000grams (9.8N) 19.1mm 44.5mm 15.2mm 18.3mm 7.9mm 4.8mm 40g
SLC34/0005 5lbs (22N) 19.1mm 44.5mm 15.2mm 18.3mm 7.9mm 4.8mm 40g
SLC34/0010 10lbs (44N) 19.1mm 44.5mm 15.2mm 18.3mm 7.9mm 4.8mm 40g
SLC34/0025 25lbs (111N) 25.4mm 44.5mm 13.2mm 18.3mm 12.7mm 6.4mm 80g
SLC34/0050 50lbs (222N) 25.4mm 44.5mm 13.2mm 18.3mm 12.7mm 6.4mm 80g
SLC34/0100 100lbs (445N) 25.4mm 44.5mm 13.2mm 18.3mm 12.7mm 6.4mm 80g
SLC34/0250 250lbs (1.1kN) 25.4mm 50.8mm 19.1mm 19.1mm 12.7mm 6.4mm 100g
SLC34/0500 500lbs (2.2kN) 25.4mm 50.8mm 19.1mm 19.1mm 12.7mm 6.4mm 100g
SLC34/1000 1000lbs (4.4kN) 25.4mm 50.8mm 19.1mm 19.1mm 12.7mm 6.4mm 100g
Specification
Excitation/supply (calibrated) 5Vdc
Output ≈2mV/V.
Linearity error ≤250lbs=±0.15% F.S., ≥500lbs=±0.2% F.S.
Hysteresis ≤250lbs=±0.15% F.S., ≥500lbs=±0.2% F.S.
Repeatability 1kg=±0.1% F.S., ≥5lbs=±0.05% F.S.
Temperature coefficient (zero) ±0.009% F.S. /℃
Temperature coefficient (span) ±0.009% F.S. /℃
Operating temperature range -54℃ to 121℃
Compensated temperature range 16℃ to 71℃
Deflection at full scale 0.05mm maximum
Over-range capacity 50% F.S.
Major construction material 17-4 PH stainless steel
Electrical termination 1.5m (integral cable)

Options and accessories