RDP Home Page Banner

Model 45 Tension/Compression Universal Load Cell


Very high accuracy
Stainless steel
High overload capacity
Infinite resolution
Fatigue rated
image of Model  45  Tension/Compression Universal Load Cell
Our SLC45 load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC45 load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC45 load sensor is not exposed to load or force in excess of its capability. The range of model SLC45 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC45 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC45 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Tension/Compression Universal Load Cell
Tension/compression load cells measure the force applied to the centre threads of the load cell.
dimensional drawing of  Model  45  Tension/Compression Universal Load Cell
A=21mm
B=25.4mm
Connector sold separately
Type Range D1 H E PCD Centre thread D2 H2 Linearity error (% F.S.) Hysteresis Accuracy
SLC45/000250 250lbs (1.1kN) 105mm 35mm 7.1mm X8 88.9mm 5/8-18 UNF-3B 34mm 3mm ±0.04% F.S. ±0.03% F.S. ±0.04% F.S.
SLC45/000500 500lbs (2.2kN) 105mm 35mm 7.1mm X8 88.9mm 5/8-18 UNF-3B 34mm 3mm ±0.04% F.S. ±0.03% F.S. ±0.04% F.S.
SLC45/001000 1000lbs (4.4kN) 105mm 35mm 7.1mm X8 88.9mm 5/8-18 UNF-3B 34mm 3mm ±0.04% F.S. ±0.03% F.S. ±0.04% F.S.
SLC45/002500 2500lbs (11kN) 105mm 35mm 7.1mm X8 88.9mm 5/8-18 UNF-3B 34mm 3mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
SLC45/005000 5000lbs (22kN) 105mm 35mm 7.1mm X8 88.9mm 5/8-18 UNF-3B 34mm 3mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
SLC45/012500 12500lbs (56kN) 154mm 44mm 10.3mm X12 130.2mm 1-1/4-12 UNF-3B 67mm 3mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
SLC45/025000 25000lbs (111kN) 154mm 44mm 10.3mm X12 130.2mm 1-1/4-12 UNF-3B 67mm 3mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
SLC45/050000 50000lbs (222kN) 203mm 64mm 13.5mm X16 165.1mm 1-3/4-12 UNF-3B 96mm 6mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
SLC45/100000 100000lbs (445kN) 279mm 89mm 17.5mm X16 228.6mm 2-3/4-8 UNF-3B 122mm 13mm ±0.05% F.S. ±0.05% F.S. ±0.06% F.S.
Specification
Excitation/supply (acceptable) 0 to 20Vdc
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω (SLC45/000250 = 700 Ω)
Repeatability ±0.02% F.S.
Temperature coefficient (zero) ±0.0014% F.S. /℃
Temperature coefficient (span) ±0.0014% rdg /℃
Operating temperature range -54℃ to 93℃
Compensated temperature range -1℃ to 54℃
Fatigue life (nominal) 100,000,000 low frequency sinusoidal reversals
Deflection at full scale 0.064mm maximum
Over-range capacity ±100% F.S.
Major construction material Stainless steel
Mating connector SAD-AA162 (PC06A-10-6S (or equivalent))

Options and accessories