Model 73 Compression Load Cell

Fatigue rated
Infinite resolution
High accuracy
High overload capacity
Stainless steel



A load cell should be mounted on a hard, flat surface. A compression load cell measures the force applied to the load button.

Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.

This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.


How it Works - Strain Gauge Load Cell

H2 = A load cell or force sensor is a device which converts load or force into an electrical signal.

5mm
Type Range D1 H E PCD D2 A B C
SLC73/000050 50lbs (222N) 76mm 30mm 1/4 57.2mm 14mm 21mm 19mm 32mm
SLC73/000100 100lbs (445N) 76mm 30mm 1/4 57.2mm 14mm 21mm 19mm 32mm
SLC73/000250 250lbs (1.1kN) 76mm 30mm 1/4 57.2mm 14mm 21mm 19mm 32mm
SLC73/000500 500lbs (2.2kN) 76mm 30mm 1/4 57.2mm 14mm 21mm 19mm 32mm
SLC73/001000 1000lbs (4.4kN) 89mm 30mm 5/16 66.7mm 18mm 21mm 19mm 32mm
SLC73/002000 2000lbs (8.9kN) 89mm 30mm 5/16 66.7mm 18mm 21mm 19mm 32mm
SLC73/003000 3000lbs (13kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/004000 4000lbs (18kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/005000 5000lbs (22kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/007500 7500lbs (33kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/010000 10000lbs (44kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/015000 15000lbs (67kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/020000 20000lbs (89kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/030000 30000lbs (133kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/050000 50000lbs (222kN) 114mm 51mm 3/8 96.3mm 38mm 32mm 38mm 51mm
SLC73/075000 75000lbs (334kN) 140mm 55mm 3/8 122.2mm 51mm 32mm 38mm 51mm
SLC73/100000 100000lbs (445kN) 140mm 55mm 3/8 122.2mm 51mm 32mm 38mm 51mm
SLC73/150000 150000lbs (667kN) 191mm 68mm 3/8 171.5mm 64mm 32mm 38mm 51mm
SLC73/200000 200000lbs (890kN) 191mm 68mm 3/8 171.5mm 64mm 32mm 38mm 51mm

Specification

Excitation/supply (calibrated)10Vdc Operating temperature range (maximum) 121C
Output2mV/V Compensated temperature range (minimum) 16C
Bridge resistance350 Ohms Compensated temperature range (maximum) 71C
Linearity error±0.1% F.S. Fatigue life (nominal) 1000000000
Hysteresis±0.1% F.S. Deflection at full scale 0.06mm
Repeatability±0.03% F.S. Over-range capacity 100% F.S.
Temperature coefficient (zero)±0.004% F.S. /C Major construction material stainless steel
Temperature coefficient (span)±0.004% rdg /C Electrical termination Connector, mating part = PT0A-10-6S (or equivalent) (SEN1005)
Connector, mating part = MS3106A-14S-6S (or equivalent) (SEN1006)
Operating temperature range (minimum)-54C    


Options and accessories

Electronics


All dimensions and specifications are nominal. www.rdpe.com/uk/slc73.htm 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591

-