Model 75 Tension/Compression Load Cell (Universal Load Cell)

Fatigue rated
High accuracy
Stainless steel
Infinite resolution



A load cell or force sensor is a device which converts load or force into an electrical signal.

A load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.

Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.

This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.


How it Works - Strain Gauge Load Cell

Type Range D1 H E PCD Centre thread A B C
SLC75/000050 50lbs (222N) 76mm 25mm 7.1mm X6 57.2mm 3/8-24 UNF 21mm 19mm 32mm
SLC75/000100 100lbs (445N) 76mm 25mm 7.1mm X6 57.2mm 3/8-24 UNF 21mm 19mm 32mm
SLC75/000250 250lbs (1.1kN) 76mm 25mm 7.1mm X6 57.2mm 3/8-24 UNF 21mm 19mm 32mm
SLC75/000500 500lbs (2.2kN) 76mm 25mm 7.1mm X6 57.2mm 3/8-24 UNF 21mm 19mm 32mm
SLC75/001000 1000lbs (4.4kN) 89mm 25mm 8.6mm X6 66.7mm 1/2-20 UNF 21mm 19mm 32mm
SLC75/002000 2000lbs (8.9kN) 89mm 25mm 8.6mm X6 66.7mm 1/2-20 UNF 21mm 19mm 32mm
SLC75/003000 3000lbs (13kN) 140mm 46mm 10.2mm X8 114.3mm 1-14 UNS 32mm 38mm 51mm
SLC75/004000 4000lbs (18kN) 140mm 46mm 10.2mm X8 114.3mm 1-14 UNS 32mm 38mm 51mm
SLC75/005000 5000lbs (22kN) 140mm 46mm 10.2mm X8 114.3mm 1-14 UNS 32mm 38mm 51mm
SLC75/007500 7500lbs (33kN) 140mm 46mm 10.2mm X8 114.3mm 1-14 UNS 32mm 38mm 51mm
SLC75/010000 10000lbs (44kN) 152mm 46mm 13.5mm X8 123.8mm 1-1/2-12 UN 32mm 38mm 51mm
SLC75/015000 15000lbs (67kN) 152mm 46mm 13.5mm X8 123.8mm 1-1/2-12 UN 32mm 38mm 51mm
SLC75/020000 20000lbs (89kN) 152mm 46mm 13.5mm X8 123.8mm 1-1/2-12 UN 32mm 38mm 51mm
SLC75/030000 30000lbs (133kN) 191mm 51mm 19.8mm X8 152.4mm 2-12 UN 32mm 38mm 51mm
SLC75/050000 50000lbs (222kN) 191mm 51mm 19.8mm X8 152.4mm 2-12 UN 32mm 38mm 51mm
SLC75/075000 75000lbs (334kN) 229mm 64mm 16.8mm X12 196.9mm 2-1/2-12 UN 32mm 38mm 51mm
SLC75/100000 100000lbs (445kN) 229mm 64mm 16.8mm X12 196.9mm 2-1/2-12 UN 32mm 38mm 51mm
SLC75/150000 150000lbs (667kN) 356mm 108mm 26.2mm X12 298.5mm 3-1/2-8 UN 32mm 38mm 51mm
SLC75/200000 200000lbs (890kN) 356mm 108mm 26.2mm X12 298.5mm 3-1/2-8 UN 32mm 38mm ?

Specification

Excitation/supply (calibrated)10Vdc Operating temperature range (maximum) 121C
Output2mV/V Compensated temperature range (minimum) 16C
Bridge resistance350 Ohms Compensated temperature range (maximum) 71C
Linearity error±0.1% F.S. Fatigue life (nominal) 1000000000
Hysteresis±0.1% F.S. Deflection at full scale 0.09mm
Repeatability±0.03% F.S. Over-range capacity 100% F.S.
Temperature coefficient (zero)±0.004% F.S. /C Major construction material stainless steel
(>= 125k lbs = carbon steel)
Temperature coefficient (span)±0.004% rdg /C Electrical termination <= 2000lbs = Connector, mating part = PT0A-10-6S (or equivalent) (SEN1005)
>=3000lbs = Connector, mating part = MS3106A-14S-6S (or equivalent) (SEN1006)
Operating temperature range (minimum)-54C    


All dimensions and specifications are nominal. www.rdpe.com/uk/slc75.htm 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591

-