Model QSFK-9 torque transducer

High accuracy
Stainless steel
Infinite resolution



Torque transducers measure the torsional force applied between the two sides of the torque transducer.

These units are bi-directional and so give an output in both directions.

Type Range D1 D2 L1 A B K
STT-QSFK9/00100 100in.lbs (11.3Nm) 19mm 57.2mm 203.2mm 70mm typical 57mm typical 5mm
STT-QSFK9/00600 600in.lbs (68Nm) 25mm 57.2mm 203.2mm 70mm typical 57mm typical 6mm
STT-QSFK9/01200 1200in.lbs (136Nm) 25mm 57.2mm 203.2mm 70mm typical 57mm typical 6mm
STT-QSFK9/03000 3000in.lbs (339Nm) 38mm 88.9mm 279.4mm 95mm typical 76mm typical 10mm
STT-QSFK9/06000 6000in.lbs (678Nm) 38mm 88.9mm 279.4mm 95mm typical 76mm typical 10mm
STT-QSFK9/12000 12000in.lbs (1356Nm) 38mm 88.9mm 279.4mm 95mm typical 76mm typical 10mm
STT-QSFK9/24000 24000in.lbs (2712Nm) 70mm 101.6mm 330.2mm 130mm typical 102mm typical 16mm

Specification

Excitation/supply (calibrated)10Vdc Temperature coefficient (zero) ±0.009% rdg /C
Output2mV/V Temperature coefficient (span) ±0.009% F.S. /C
Bridge resistance350 Ohms Operating temperature range -54C to 107C
Gauge typefoil Compensated temperature range 16C to 71C
Linearity error±0.1% F.S. Over-range capacity 50% F.S.
Hysteresis±0.1% F.S. Major construction material Stainless steel
Repeatability±0.03% F.S. Electrical termination Connector, mating part = MS3106A-14S-6S (or equivalent) (SEN1006)
Resolutioninfinite    


Options and accessories

Electronics


All dimensions and specifications are nominal. www.rdpe.com/uk/stt-qsfk.htm 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591

-