Mounting Block

Our mounting block offers a means of supporting our transducers. We suggest that at least 2 are used per transducer and for longer stroke units 3 or 4.

For very high accuracy or physically demanding applications, you may wish to use metal mounting blocks.

   Data sheet (114kb)
Picture of transducer wirh bearings fitted

MB01 MB02


D 0.811'' D 0.4'' or 0.3''
W 2.5'' W 1.2''
H 2.0'' H 0.9''
T 0.5'' T 0.4''
MCV 2.0'' MCV 0.9''
MCH 1.2'' MCH 0.4''
Major construction material Glass filled nylon Major construction material Glass filled nylon
Operating temperature range -4F to 230F (392F For short periods) Operating temperature range -4F to 230F (392F For short periods)
Drawing Drawing Drawing

All dimensions and specifications are nominal. www.rdpe.com/us/mb.htm 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 

RDP Electrosense
2216 Pottstown Pike
Pottstown, PA 19465
USA
Tel: 610-469-0850
Tel: 800-334-5838
Fax: 610-469-0852
Email: info@rdpe.com

-