|
|
||||||||
|
||||||||
|
Rod-end bearings can be used with captive type transducers where there may be some mis-alignment
They should not be used horizontally if the transducer range is greater than ±100mm. For ranges larger than this you may wish to consider using our Mounting block
 | |||||||
|---|---|---|---|---|---|---|---|
| Type | Thread | L | ID | OD | L2 | TA | |
 | BRG1000 | M5x0,8, 14mm | 27mm | 4,987mm to 5,064mm | 16mm | 8mm | 11degrees |
 | BRG1001 | M5x0,8, 20mm | 33mm | 4,987mm to 5,064mm | 16mm | 8mm | 11degrees |
| Specification | |
|---|---|
| Major construction material | Plated low carbon steel |
| Operating temperature range | -35°C to 170°C |
| Maximum radiation dose | 8k Gy |
|
||||
| Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment. | ||||
| Manufacturer RDP Electronics Ltd Grove Street, Heath Town Wolverhampton, West Midlands, WV10 0PY United Kingdom Tel: +44 1902 457512 Fax: +44 1902 452000 Email: sales@rdpe.com URL: www.rdpe.com |
Distributor Transducer Technology PO Box 13592, Northmead Benoni, 1511, South Africa Tel: +27 11 425 2094 Fax: +27 11 425 3359 Email: sales@transducers.co.za - |
|||