PY Extreme Environment Non-Contact Displacement Transducer

High radiation resistance
High temperature survival
Submersible
Stainless steel
Infinite resolution
Non-contact


   Data sheet (186kb)
The PY non-contact displacement transducer measures the distance between its front face and a target made from a ferritic material. A ferritic material is one which is attracted by a magnet.

This sensor is appropriate for high temperature, high pressure and high nuclear radiation position measurement applications. Many applications in turbines, in nuclear power stations and in research labs are appropriate for this sensor.

There are two types of PY transducer, a single coil version (which must be used in pairs) and a double coil version which can be used alone.

As the output of the PY is not linear, linearisation may be necessary depending on the application. Our 615 amplifier is designed for this.

Single coil version.
The single coil displacement transducer version must be used in pairs for example one on each side of a rotation shaft.
Maximum measurement gap
Typical target
Type Maximum measurement gap Operating temperature range Maximum radiation dose A B C D E F G H
PY102 1,5mm -220°C to 220°C 1M Gy 12,0mm 14,0mm 12,0mm 12,0mm 8,5mm 2,5mm 12,5mm 28,5mm
PY106 1,5mm -220°C to 600°C 1G Gy 12,0mm 14,0mm 12,0mm 12,0mm 8,5mm 2,5mm 12,5mm 28,5mm
PY152 3mm -220°C to 220°C 1M Gy 15,0mm 18,0mm 15,0mm 13,0mm 9,0mm 5,0mm 15,0mm 38,0mm
PY156 3mm -220°C to 600°C 1G Gy 15,0mm 18,0mm 15,0mm 13,0mm 9,0mm 5,0mm 15,0mm 38,0mm
PY252 6mm -220°C to 220°C 1M Gy 25,0mm 28,0mm 25,0mm 20,0mm 9,0mm 5,0mm 15,0mm 37,0mm
PY656 6mm -220°C to 600°C 1G Gy 25,0mm 28,0mm 25,0mm 20,0mm 9,0mm 5,0mm 15,0mm 37,0mm

Double coil version.
The double coil transducer version can be used to measure the gap between a single PY and a suitable target.
Maximum measurement gap
Typical target
Type Maximum measurement gap Operating temperature range Maximum radiation dose A B C D E F G H
PY102C 1,5mm -220°C to 220°C 1M Gy 12,0mm 14,0mm 12,0mm 12,0mm 9,5mm 5,0mm 18,0mm 37,5mm
PY106C 1,5mm -220°C to 600°C 1G Gy 12,0mm 14,0mm 12,0mm 12,0mm 9,5mm 5,0mm 18,0mm 37,5mm
PY152C 3mm -220°C to 220°C 1M Gy 15,0mm 18,0mm 15,0mm 13,0mm 15,0mm 10,0mm 15,0mm 49,0mm
PY156C 3mm -220°C to 600°C 1G Gy 15,0mm 18,0mm 15,0mm 13,0mm 15,0mm 10,0mm 15,0mm 49,0mm
PY252C 6mm -220°C to 220°C 1M Gy 25,0mm 28,0mm 25,0mm 20,0mm 15,0mm 10,0mm 15,0mm 48,0mm
PY256C 6mm -220°C to 600°C 1G Gy 25,0mm 28,0mm 25,0mm 20,0mm 15,0mm 10,0mm 15,0mm 48,0mm

Specification
Temperature coefficient (combined zero and span)±0,05% F.S. /°C (typical) Maximum static pressure 20MPa (100°C maximum)
Electrical termination2m (integral cable) Longer available to order,    


Options and accessories
Electronics


All dimensions and specifications are nominal. www.rdpe.com/za/py.htm 20080110
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
Manufacturer
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
 Distributor
Transducer Technology
Unit 8, Canberra Industrial Park
Derrick Coetzee Street
Jet Park, 1459, South Africa

Tel: +27 11 397 7733
Fax: +27 11 397 8909
Email: sales@transducers.co.za

-