A load cell or force sensor is a device which converts load or force into an electrical signal.
This series of compression load cell is bolted down using the two mounting holes and the force applied to the threaded hole.
Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
How it Works - Strain Gauge Load Cell
RL technical manual (103kb)
Data sheet (243kb)
|Type||Range||A||B||C||D||Diameter E||Diameter F||G||Diameter H||M||N||Diameter P|
|Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.|
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
Tel: +44 1902 457512
Fax: +44 1902 452000
PO Box 13592, Northmead
Benoni, 1511, South Africa
Tel: +27 11 425 2094
Fax: +27 11 425 3359