Miniature
Stainless steel
Infinite resolution
Our SLC-LFH7I load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC-LFH7I load cell should be mounted on a hard, flat surface. This compression load cell measures the compressive force applied between the top and bottom of the load cell.
Care should be taken to ensure that the model SLC-LFH7I load sensor is not exposed to load or force in excess of its capability. The range of model SLC-LFH7I compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC-LFH7I transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC-LFH7I we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
The SLC-LFH7I load cell should be mounted on a hard, flat surface. This compression load cell measures the compressive force applied between the top and bottom of the load cell.
Care should be taken to ensure that the model SLC-LFH7I load sensor is not exposed to load or force in excess of its capability. The range of model SLC-LFH7I compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC-LFH7I transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC-LFH7I we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Compression Load Cell
Our SLC-LFH7I compression load cell measures the force applied to the load button.
| Type | Range | D1 | H | D2 | H2 |
|---|---|---|---|---|---|
| SLC-LFH7I00250 | 250lbs (1,1kN) | 12,7mm | 9,7mm | 6,9mm | 3,3mm |
| SLC-LFH7I00500 | 500lbs (2,2kN) | 12,7mm | 9,7mm | 7,1mm | 3,3mm |
| SLC-LFH7I01000 | 1000lbs (4,4kN) | 12,7mm | 9,7mm | 7,9mm | 3,3mm |
| SLC-LFH7I02000 | 2000lbs (9kN) | 12,7mm | 9,7mm | 10,4mm | 3,3mm |
| SLC-LFH7I03000 | 3000lbs (13kN) | 12,7mm | 9,7mm | 11,4mm | 3,3mm |
| SLC-LFH7I05000 | 5000lbs (22kN) | 16,0mm | 15,2mm | 13,5mm | 5,8mm |
| SLC-LFH7I07500 | 7500lbs (33kN) | 22,4mm | 16,0mm | 16,0mm | 13,7mm |
| SLC-LFH7I10000 | 10000lbs (44kN) | 22,4mm | 16,0mm | 16,0mm | 13,7mm |
Specification
Options and accessories
