RDP Home Page Banner

E746H In-Line LVDT Amplifier .
Supply ±12 to ±20V, Output ±5V or 0 to 10V


LVDT amplifier
Voltage output
Factory fitted
image of E746H In-Line LVDT Amplifier . <BR> Supply ±12 to ±20V, Output ±5V  or  0 to 10V
The E746H amplifier is designed to factory fit in the cable of any RDP Industrial series LVDT. They convert the LVDT signal into a ±5V Many LVDT transducers from our stock are as standard compatible with the E746H amplifier which means that in many cases we can quickly provide dc to dc transducers.
dimensional drawing of LVDT amplifier E74
D=27mm
H=22mm
L=92mm
Specification
Supply voltage (dual) ±12V to ±18V 30mA
Supply voltage (single, must be floating) 24V to 36V 30mA
Change in output for change in supply 5mV/V
Output 1 0V to 10V (+0% - 5%)
Output 2 ±5V (+0% - 5%)
Output ripple 30mV (peak-to-peak)
Analogue output bandwidth 200Hz
Output impedance 2 Ω
Temperature coefficient (span) ±0.03% F.S. /℃ (typical)
Operating temperature range -20℃ to 70℃
Electrical termination 2m (integral cable) Longer available to order.