Model RLU Tension/Compression Load Cell (Universal Load Cell)

Low cost
Very high accuracy
Infinite resolution

A load cell or force sensor is a device which converts load or force into an electrical signal.

A load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.

Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.

This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

How it Works - Strain Gauge Load Cell

   RL technical manual (103kb)

   Data sheet (204kb)

CD1 = 13.6mm
CD2 = 5.05mm ±0.15mm
CL1 = 22mm
CL2 = 27mm
Type Range D1 H PCD Top (Drilled for cap-head screw) Centre thread
RLU00250 ±250kgf (±2.5kN) 75mm 25mm 57mm 6 X M6x1 M10x1.5
RLU00500 ±500kgf (±4.9kN) 75mm 25mm 57mm 6 X M6x1 M10x1.5
RLU01000 ±1000kgf (±9.8kN) 90mm 25mm 66mm 6 X M8x1.25 M12x1.75
RLU02500 ±2500kgf (±24.5kN) 90mm 25mm 66mm 6 X M8x1.25 M12x1.75
RLU05000 ±5000kgf (±49kN) 140mm 45mm 115mm 8 X M10x1.5 M24x3.0
RLU10000 ±10000kgf (±98kN) 152mm 45mm 124mm 8 X M12x1.75 M36x4.0


Excitation/supply (acceptable)0 to 15V Temperature coefficient (zero) ±0.002% F.S. /C (typical)
Excitation/supply (calibrated)10V Temperature coefficient (span) ±0.002% F.S. /C (typical)
Output2mV/V ±10% Operating temperature range -20C to 60C
Zero balance2% F.S. Compensated temperature range -10C to 40C
Bridge resistance350/700Ohms nominal Ingress protection (IP) 65
Linearity error±0.03% F.S. Over-range capacity 50%
Hysteresis±0.03% F.S. Major construction material Steel
Repeatability±0.03% F.S. Electrical termination 3m (integral cable)

Options and accessories


All dimensions and specifications are nominal. 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
USA & Canada
RDP Electrosense
2216 Pottstown Pike
Pottstown, PA 19465
Tel: 610-469-0850
Tel: 800-334-5838
Fax: 610-469-0852
Rest of the world
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom

Tel: +44 1902 457512
Fax: +44 1902 452000