RDP Home Page Banner

Model RLW Industrial Weighing Compression Load Cell


Very high accuracy
Infinite resolution
Low cost
dimensional drawing of  Model  RLW Industrial Weighing Compression Load Cell
A load cell or force sensor is a device which converts load or force into an electrical signal.
This series of compression load cell is bolted down using the two mounting holes and the force applied to the threaded hole.
Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Industrial Weighing Compression Load Cell
This series of compression load cell is bolted down using the two mounting holes and the force applied to the threaded hole.
dimensional drawing of  Model  RLW Industrial Weighing Compression Load Cell
CD1=13.6mm
CD2=5.05mm ±0.15mm
CL1=22mm
CL2=27mm
Type Range A B C D E F G H M N P
RLW0010 10kgf (98N) 120mm 10mm 18mm 82mm 36mm 25.5mm M8 45mm 20mm 20mm 8.5mm
RLW0025 25kgf (245N) 120mm 10mm 18mm 82mm 36mm 25.5mm M8 45mm 20mm 20mm 8.5mm
RLW0050 50kgf (491N) 120mm 10mm 18mm 82mm 36mm 25.5mm M8 45mm 20mm 20mm 8.5mm
RLW0100 100kgf (981N) 120mm 10mm 18mm 82mm 36mm 25.5mm M8 45mm 20mm 20mm 8.5mm
RLW0250 250kgf (2.5kN) 120mm 10mm 18mm 82mm 36mm 25.5mm M8 45mm 20mm 20mm 8.5mm
RLW0500 500kgf (4.9kN) 210mm 14mm 40mm 133mm 60mm 37.0mm M12 60mm 25mm 36mm 13.0mm
RLW1000 1000kgf (9.8kN) 210mm 14mm 40mm 133mm 60mm 37.0mm M12 60mm 25mm 36mm 13.0mm
RLW1500 1500kgf (14.7kN) 210mm 14mm 40mm 133mm 60mm 37.0mm M12 60mm 25mm 36mm 13.0mm
Specification
Excitation/supply (acceptable) 0 to 15V
Excitation/supply (calibrated) 10V
Output 2mV/V ±10%
Zero balance 2% F.S.
Bridge resistance 350 Ω
Linearity error ±0.03% F.S.
Hysteresis ±0.03% F.S.
Repeatability ±0.03% F.S.
Resolution Infinite
Temperature coefficient (zero) ±0.003% F.S. /℃ (typical)
Temperature coefficient (span) ±0.003% F.S. /℃ (typical)
Operating temperature range -20℃ to 60℃
Compensated temperature range -10℃ to 40℃
Ingress protection (IP) 67
Over-range capacity 50%
Major construction material Steel
Electrical termination 3m (integral cable)

Options and accessories