RDP Home Page Banner

Model RM Tension Load Cell

Stainless steel
High Range
Infinite resolution
image of Model  RM Tension Load Cell
Our SLC-RM load cell or force sensor is a device which converts load or force into an electrical signal.
A tension load cell measures the tension force applied between the top and bottom mounting threads.
Care should be taken to ensure that the model SLC-RM load sensor is not exposed to load or force in excess of its capability. The range of model SLC-RM tension load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC-RM transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC-RM we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Tension Load Cell
A tension load cell measures the tension force applied between the top and bottom mounting threads.
dimensional drawing of Model  RM Tension Load Cell
Type D1 L1 L2
AL413 38mm 66mm See table
AL415 44mm 66mm See table
AL417 64mm 77mm See table
AL411 (75k & 100k lbs) 89mm 102mm See table
AL411 (150k & 200k lbs) 114mm 127mm See table
To order this product please specify range, type and thread size
Type Thread options 1/2-20 3/4-16 7/8-14 1-14 1-1/2-12 2-1/2-12 UN 3-1/2-8 UNF
L2 24mm 24mm 24mm 32mm 38mm 76mm 102mm
SLC-RM002000 2000lbs (9kN) AL413 AL413 AL413        
SLC-RM003000 3000lbs (13kN) AL413 AL413 AL413        
SLC-RM004000 4000lbs (18kN) AL413 AL413 AL413        
SLC-RM005000 5000lbs (22kN) AL413 AL413 AL413        
SLC-RM007500 7500lbs (33kN)   AL415 AL415 AL415 AL417    
SLC-RM010000 10000lbs (44kN)   AL415 AL415 AL415 AL417    
SLC-RM015000 15000lbs (67kN)   AL415 AL415 AL415 AL417    
SLC-RM020000 20000lbs (89kN)     AL415 AL415 AL417    
SLC-RM030000 30000lbs (133kN)         AL417    
SLC-RM050000 50000lbs (222kN)         AL417    
SLC-RM075000 75000lbs (334kN)           AL411  
SLC-RM100000 100000lbs (445kN)           AL411  
SLC-RM150000 150000lbs (667kN)             AL411
SLC-RM200000 200000lbs (890kN)             AL411
Excitation/supply (acceptable) 0 to 15V (ac or dc)
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω
Linearity error ≤50k lbs = ±0.15% F.S. ≥75k lbs = ±0.2% F.S.
Hysteresis ≤50k lbs = ±0.15% F.S. ≥75k lbs = ±0.2% F.S.
Repeatability ±0.05% F.S.
Resolution Infinite
Temperature coefficient (zero) ±0.009% F.S. /℃
Temperature coefficient (span) ±0.01% rdg /℃
Operating temperature range -54℃ to 121℃
Compensated temperature range 16℃ to 71℃
Deflection at full scale 0.1mm maximum
Over-range capacity 50% F.S.
Major construction material stainless steel
Mating connector <=50 000 lbs = SEN1005 (PT0A-10-6S (or equivalent))
>=75 000 lbs = SEN1006 (MS3106A-14S-6S (or equivalent))

Options and accessories