RDP Home Page Banner

Model TH Through-Hole Compression Load Cell

Stainless steel
High Range
Infinite resolution
image of Model  TH Through-Hole Compression Load Cell
Our SLC-TH load cell or force sensor is a device which converts load or force into an electrical signal.
This compression load cell measures the compressive force applied between the top and bottom of the load cell. It is particularly suited to applications where the load cell is bolted down.
Care should be taken to ensure that the model SLC-TH load sensor is not exposed to load or force in excess of its capability. The range of model SLC-TH compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
One particular feature of this transducer is its very small size
The SLC-TH transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC-TH we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Compression load cell
Our SLC-TH compression load cell measures the force applied to the load button.
dimensional drawing of  Model  TH Through-Hole Compression Load Cell
Type Range D1 H ID
SLC-TH015000 15000lbs (67kN) 38mm 38mm 19.3mm
SLC-TH020000 20000lbs (89kN) 38mm 38mm 19.3mm
SLC-TH030000 30000lbs (133kN) 51mm 51mm 25.7mm
SLC-TH050000 50000lbs (222kN) 51mm 51mm 25.7mm
SLC-TH075000 75000lbs (334kN) 64mm 64mm 32.0mm
SLC-TH100000 100000lbs (445kN) 64mm 64mm 32.0mm
SLC-TH150000 150000lbs (667kN) 76mm 76mm 38.4mm
SLC-TH200000 200000lbs (890kN) 89mm 89mm 44.7mm
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω
Gauge type foil
Linearity error ±0.25% F.S.
Hysteresis ±0.25% F.S.
Repeatability ±0.1% F.S.
Resolution Infinite
Temperature coefficient (zero) ±0.009% F.S. /℃
Temperature coefficient (span) ±0.01% rdg /℃
Operating temperature range -54℃ to 121℃
Compensated temperature range 16℃ to 71℃
Deflection at full scale 0.064mm
Over-range capacity 50% F.S.
Major construction material stainless steel
Electrical termination 1.5m (integral cable)

Options and accessories