RDP Home Page Banner

Model 47 Tension/Compression Load Cell (Universal Load Cell)


Very high accuracy
Stainless steel
High overload capacity
Infinite resolution
Fatigue rated
image of Model  47  Tension/Compression Load Cell (Universal Load Cell)
A load cell or force sensor is a device which converts load or force into an electrical signal.
A load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Tension/Compression Load Cell (Universal Load Cell)
Tension/compression load cells measure the force applied to the centre threads of the load cell.
dimensional drawing of  Model  47  Tension/Compression Load Cell (Universal Load Cell)
A=21mm
B=25.4mm
Connector sold separately
Type Range D1 H Centre thread D2 H2 D3 Linearity error (% F.S.) Hysteresis Accuracy
SLC47/000250 250lbs (1.1kN) 105mm 63mm 5/8-18 UNF-3B 34mm 3mm 32mm ±0.02% F.S. ±0.02% F.S. ±0.02% F.S.
SLC47/000500 500lbs (2.2kN) 105mm 63mm 5/8-18 UNF-3B 34mm 3mm 32mm ±0.02% F.S. ±0.02% F.S. ±0.02% F.S.
SLC47/001000 1000lbs (4.4kN) 105mm 63mm 5/8-18 UNF-3B 34mm 3mm 32mm ±0.02% F.S. ±0.02% F.S. ±0.02% F.S.
SLC47/002500 2500lbs (11kN) 105mm 63mm 5/8-18 UNF-3B 34mm 3mm 32mm ±0.03% F.S. ±0.04% F.S. ±0.03% F.S.
SLC47/005000 5000lbs (22kN) 105mm 63mm 5/8-18 UNF-3B 34mm 3mm 32mm ±0.03% F.S. ±0.04% F.S. ±0.03% F.S.
SLC47/012500 12500lbs (56kN) 154mm 89mm 1-1/4-12 UNF-3B 67mm 3mm 57mm ±0.04% F.S. ±0.05% F.S. ±0.04% F.S.
SLC47/025000 25000lbs (111kN) 154mm 89mm 1-1/4-12 UNF-3B 67mm 3mm 57mm ±0.04% F.S. ±0.05% F.S. ±0.04% F.S.
SLC47/050000 50000lbs (222kN) 203mm 114mm 1-3/4-12 UNF-3B 96mm 6mm 76mm ±0.04% F.S. ±0.05% F.S. ±0.04% F.S.
SLC47/100000 100000lbs (445kN) 279mm 165mm 2-3/4-8 UNF-3B 122mm 13mm 114mm ±0.05% F.S. ±0.05% F.S. ±0.05% F.S.
Specification
Excitation/supply (acceptable) 0 to 20Vdc
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω (SLC47/000250 = 700 Ω)
Repeatability ±0.01% F.S.
Temperature coefficient (zero) ±0.0014% F.S. /℃
Temperature coefficient (span) ±0.0014% rdg /℃
Operating temperature range -54℃ to 93℃
Compensated temperature range -1℃ to 54℃
Fatigue life (nominal) 100,000,000 low frequency sinusoidal reversals
Deflection at full scale 0.064mm maximum
Over-range capacity ±100% F.S.
Major construction material Stainless steel
Mating connector SAD-AA162 (PC06A-10-6S (or equivalent))

Options and accessories