RDP Home Page Banner

Model 53 Compression Load Cell


Stainless steel
Infinite resolution
Miniature
image of Model  53 Compression Load Cell
A load cell or force sensor is a device which converts load or force into an electrical signal. A load cell should be mounted on a hard, flat surface. A compression load cell measures the force applied to the load button.
Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Miniature compression load cell
A load cell should be mounted on a hard, flat surface. A compression load cell measures the force applied to the load button.
dimensional drawing of  Model  53 Compression Load Cell
Type Range D1 H E PCD D2 H2
SLC53/00005 5lbs (22N) 25mm 16mm #4-40 UNC, 5.6mm 19.1mm 5mm 1.3mm
SLC53/00010 10lbs (44N) 25mm 16mm #4-40 UNC, 5.6mm 19.1mm 5mm 1.3mm
SLC53/00025 25lbs (111N) 25mm 16mm #4-40 UNC, 5.6mm 19.1mm 5mm 1.3mm
SLC53/00050 50lbs (222N) 25mm 16mm #4-40 UNC, 5.6mm 19.1mm 5mm 1.3mm
SLC53/00100 100lbs (445N) 25mm 16mm #4-40 UNC, 5.6mm 19.1mm 5mm 1.3mm
SLC53/00250 250lbs (1.1kN) 32mm 10mm #6-32 UNC, 6.4mm 25.4mm 8mm 1.8mm
SLC53/00500* 500lbs (2.2kN) 32mm 10mm #6-32 UNC, 6.4mm 25.4mm 8mm 1.8mm
SLC53/01000* 1000lbs (4.4kN) 32mm 10mm #6-32 UNC, 6.4mm 25.4mm 8mm 1.8mm
SLC53/02000* 2000lbs (8.9kN) 32mm 10mm #6-32 UNC, 6.4mm 25.4mm 8mm 1.8mm
SLC53/03000 3000lbs (13kN) 38mm 16mm #6-32 UNC, 6.4mm 31.8mm 10mm 2.0mm
SLC53/04000 4000lbs (18kN) 38mm 16mm #6-32 UNC, 6.4mm 31.8mm 10mm 2.0mm
SLC53/05000* 5000lbs (22kN) 38mm 16mm #6-32 UNC, 6.4mm 31.8mm 10mm 2.0mm
SLC53/07500 7500lbs (33kN) 38mm 16mm #6-32 UNC, 6.4mm 31.8mm 10mm 2.0mm
SLC53/10000* 10000lbs (44kN) 38mm 16mm #6-32 UNC, 6.4mm 31.8mm 10mm 2.0mm
SLC53/15000 15000lbs (67kN) 51mm 25mm #6-32 UNC, 6.4mm 41.3mm 15mm 3.0mm
SLC53/20000* 20000lbs (89kN) 51mm 25mm #6-32 UNC, 6.4mm 41.3mm 15mm 3.0mm
SLC53/30000 30000lbs (133kN) 51mm 25mm #6-32 UNC, 6.4mm 41.3mm 15mm 3.0mm
SLC53/50000* 50000lbs (222kN) 76mm 38mm #6-32 UNC, 6.4mm 60.3mm 20mm 4.6mm
Specification
Excitation/supply (acceptable) 0 to 10V(ac or dc)
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω
Linearity error ±0.25% F.S.
Hysteresis ±0.3% F.S.
Repeatability ±0.1% F.S.
Resolution Infinite
Temperature coefficient (zero) ±0.009% F.S. /℃
Temperature coefficient (span) ±0.02% rdg /℃
Operating temperature range -54℃ to 121℃
Compensated temperature range 16℃ to 71℃
Deflection at full scale 0.076mm maximum
Over-range capacity 50% F.S.
Major construction material 17-4 PH stainless steel
Electrical termination 1.5m (integral cable)

Options and accessories