RDP Home Page Banner

Model 73 Compression Load Cell


High accuracy
High overload capacity
Stainless steel
Infinite resolution
Fatigue rated
image of Model  73 Compression Load Cell
A load cell should be mounted on a hard, flat surface. A compression load cell measures the force applied to the load button.
Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Compression Load Cell
A compression load cell measures the force applied to the load button.
dimensional drawing of  Model  73 Compression Load Cell
Connector sold separately
H2=4.6mm
Connector housing A B C
5lbs (22N) to 5000lbs (22kN) 21mm 19mm 32mm
7500lbs (33kN) to 500000lbs (2.2MN) 32mm 38mm 51mm
Type Range D1 H E PCD D2
SLC73/000050 50lbs (222N) 76mm 30mm 1/4 57.2mm 14mm
SLC73/000100 100lbs (445N) 76mm 30mm 1/4 57.2mm 14mm
SLC73/000250 250lbs (1.1kN) 76mm 30mm 1/4 57.2mm 14mm
SLC73/000500 500lbs (2.2kN) 76mm 30mm 1/4 57.2mm 14mm
SLC73/001000 1000lbs (4.4kN) 89mm 30mm 5/16 66.7mm 18mm
SLC73/002000 2000lbs (8.9kN) 89mm 30mm 5/16 66.7mm 18mm
SLC73/003000 3000lbs (13kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/004000 4000lbs (18kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/005000 5000lbs (22kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/007500 7500lbs (33kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/010000 10000lbs (44kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/015000 15000lbs (67kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/020000 20000lbs (89kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/030000 30000lbs (133kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/050000 50000lbs (222kN) 114mm 51mm 3/8 96.3mm 38mm
SLC73/075000 75000lbs (334kN) 140mm 55mm 3/8 122.2mm 51mm
SLC73/100000 100000lbs (445kN) 140mm 55mm 3/8 122.2mm 51mm
SLC73/150000 150000lbs (667kN) 191mm 68mm 3/8 171.5mm 64mm
SLC73/200000 200000lbs (890kN) 191mm 68mm 3/8 171.5mm 64mm
Specification
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω
Linearity error ±0.1% F.S.
Hysteresis ±0.1% F.S.
Repeatability ±0.03% F.S.
Temperature coefficient (zero) ±0.004% F.S. /℃
Temperature coefficient (span) ±0.004% F.S. /℃
Operating temperature range -54℃ to 121℃
Compensated temperature range 16℃ to 71℃
Fatigue life (nominal) 1000000000
Deflection at full scale 0.15mm maximum
Over-range capacity 100% F.S.
Major construction material stainless steel
Mating connector <=2000 lbs = SEN1005 (PT0A-10-6S (or equivalent))
>=3000 lbs = SEN1006 (MS3106A-14S-6S (or equivalent))

Options and accessories