Flush diaphragm
Stainless steel
Infinite resolution
Gauge pressure
This type of sensor measures the pressure of a compatible fluid or gas.
A gauge pressure transducer measures with respect to atmospheric pressure.
This transducer has a flush diaphragm so there are no cavities for sediment to collect or for material to solidify.
A gauge pressure transducer measures with respect to atmospheric pressure.
This transducer has a flush diaphragm so there are no cavities for sediment to collect or for material to solidify.
| Type | Range |
|---|---|
| SPT-A205/00100 | 100psi (689kPa) |
| SPT-A205/00150 | 150psi (1MPa) |
| SPT-A205/00200 | 200psi (1MPa) |
| SPT-A205/00300 | 300psi (2MPa) |
| SPT-A205/00500 | 500psi (3MPa) |
| SPT-A205/00750 | 750psi (5MPa) |
| SPT-A205/01000 | 1000psi (7MPa) |
| SPT-A205/01500 | 1500psi (10MPa) |
| SPT-A205/02000 | 2000psi (14MPa) |
| SPT-A205/03000 | 3000psi (21MPa) |
| SPT-A205/05000 | 5000psi (34MPa) |
| SPT-A205/07500 | 7500psi (52MPa) |
| SPT-A205/10000 | 10000psi (69MPa) |
| SPT-A205/15000 | 15000psi (103MPa) |
AF=19.1mm (HEX)
L1=40mm
TF=14.5mm
Specification
| Excitation/supply (calibrated) | 5Vdc |
|---|---|
| Output | 2mV/V nominal |
| Bridge resistance | 350 Ω |
| Gauge type | foil |
| Linearity error | ±0.5 |
| Hysteresis | ±0.5% F.S. |
| Repeatability | ±0.1% F.S. |
| Resolution | infinite |
| Temperature coefficient (zero) | ±0.02% F.S. /℃ |
| Temperature coefficient (span) | ±0.04% F.S. /℃ |
| Operating temperature range | -54℃ to 149℃ |
| Compensated temperature range | 16℃ to 71℃ |
| Over-range capacity | 50% F.S. |
| Major construction material | 17-4PH (stainless steel) |
| Port material | 17-4PH (stainless steel) |
| Pressure port thread | 1/4-18 NPT |
| Mating connector | SEN1005 (PT0A-10-6S (or equivalent)) |
| Total weight | 57g (maximum) |
Options and accessories
