RDP Home Page Banner

Model S Flush Diaphragm Pressure Transducer

Flush diaphragm
Stainless steel
Gauge pressure
image of Model  S Flush Diaphragm Pressure Transducer
The RDP model SPT-S sensor measures the pressure of a compatible fluid or gas.
The SPT-S gauge pressure transducer measures with respect to atmospheric pressure.
This transducer has a flush diaphragm so there are no cavities for sediment to collect or for material to solidify.
dimensional drawing of  Model  S Flush Diaphragm Pressure Transducer
Type Range
SPT-S00150 150psi (1.0MPa)
SPT-S00200* 200psi (1.4MPa)
SPT-S00300 300psi (2.1MPa)
SPT-S00500* 500psi (3.4MPa)
SPT-S00750 750psi (5.2MPa)
SPT-S01000* 1000psi (6.9MPa)
SPT-S01500 1500psi (10MPa)
SPT-S02000* 2000psi (14MPa)
SPT-S03000* 3000psi (21MPa)
SPT-S05000* 5000psi (34MPa)
SPT-S07500 7500psi (52MPa)
SPT-S10000* 10000psi (69MPa)
SPT-S15000 15000psi (103MPa)
Type (specify with order) Mounting thread TF D1 D2 L1
BP357 3/8-24 UNF 11mm 13mm 7.9mm 18mm
BP358 7/16-20 UNF 13mm 14mm 9.5mm 19mm
Excitation/supply (calibrated) 5Vdc
Output 2mV/V
Bridge resistance 350 Ω
Gauge type foil
Linearity error ±1% F.S.
Hysteresis ±1% F.S.
Repeatability ±0.15% F.S.
Resolution infinite
Temperature coefficient (zero) ±0.02% F.S. /℃
Temperature coefficient (span) ±0.04% rdg /℃
Operating temperature range -54℃ to 149℃
Compensated temperature range 16℃ to 71℃
Over-range capacity 50% F.S.
Major construction material 17-4PH stainless steel
Port material 17-4PH stainless steel
Electrical termination 1.5m (integral cable)

Options and accessories