Model S Flush Diaphragm Pressure Transducer

Flush diaphragm
Stainless steel
Gauge pressure
Miniature



This type of sensor measures the pressure of a compatible fluid or gas.

A gauge pressure transducer measures with respect to atmospheric pressure.

This transducer has a flush diaphragm so there are no cavities for sediment to collect or for material to solidify.


How it Works - Strain Gauge Pressure Transducer

Gauge pressure

Type
(specify with order) 		Mounting thread TF D1 D2 L1
BP357 3/8-24 UNF 11mm 13mm 7.9mm 18mm
BP358 7/16-20 UNF 13mm 14mm 9.5mm 19mm
Type * = shorter lead-time Range
SPT-S00150 150psi (10.3bar)
SPT-S00200* 200psi (13.8bar)
SPT-S00300 300psi (20.7bar)
SPT-S00500* 500psi (34.5bar)
SPT-S00750 750psi (51.7bar)
SPT-S01000* 1000psi (69bar)
SPT-S01500 1500psi (103bar)
SPT-S02000* 2000psi (138bar)
SPT-S03000* 3000psi (207bar)
SPT-S05000* 5000psi (345bar)
SPT-S07500 7500psi (517bar)
SPT-S10000* 10000psi (689bar)
SPT-S15000 15000psi (1034bar)
SPT-S20000 20000psi (1379bar)

Specification
Excitation/supply (calibrated)5Vdc Temperature coefficient (zero) ±0.02% F.S. /°C
Output2mV/V Temperature coefficient (span) ±0.04% rdg /°C
Bridge resistance350 Ohms Operating temperature range -54°C to 149°C
Gauge typefoil Compensated temperature range 16°C to 71°C
Linearity error±1% F.S. Over-range capacity 50% F.S.
Hysteresis±1% F.S. Major construction material 17-4PH stainless steel
Repeatability±0.1% F.S. Port material 17-4PH stainless steel
Resolutioninfinite Electrical termination 2m (integral cable)


All dimensions and specifications are nominal. www.rdpe.com/uk/spt-s.htm 20080110
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
 
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Email: sales@rdpe.com
URL: www.rdpe.com
Registered in England No. 1688591
-