Model Z Wet/Wet Differential Pressure Transducer

High accuracy

Stainless steel

High overload capacity

High Range

Infinite resolution

Differential pressure

The RDP model SPT-Z-D sensor measures the pressure of a compatible fluid or gas.
Differential pressure transducers measure the difference in pressure between the two pressure ports.
These transducers are compatible with a wide range of fluids and gasses.

dimensional drawing of Model A5 Wet/Wet Differential Pressure Transducer

Type	Range
SPT-Z-D00050	50psi
SPT-Z-D00075	75psi
SPT-Z-D00100	100psi
SPT-Z-D00150	150psi
SPT-Z-D00200	200psi
SPT-Z-D00300	300psi
SPT-Z-D00500	500psi
SPT-Z-D00750	750psi

A=Pressure port thread = 1/8-27 NPT

B=Mounting thread = 1/4-28 UNF

C=Drain port = 1/8-27 NPT

D1=3.00''

D2=1.50''

L1=2.50''

L2=1.40''

Type	Range
SPT-Z-D02000	2000psi
SPT-Z-D03000	3000psi
SPT-Z-D05000	5000psi
SPT-Z-D07500	7500psi
SPT-Z-D10000	10000psi

A=Pressure port thread = 1/4-18 NPT

D1=2.25''

D2=1.50''

L1=2.70''

L2=1.40''

L3=0.44''

Specification

Excitation/supply (calibrated)	10Vdc
Output	2mV/V
Bridge resistance	350 Ω
Gauge type	foil
Accuracy	±0.25% F.S.
Linearity error	±0.15% F.S.
Hysteresis	±0.10% F.S.
Repeatability	±0.05% F.S.
Resolution	infinite
Temperature coefficient (zero)	±0.005% F.S. /℉
Temperature coefficient (span)	±0.005% rdg /℉
Operating temperature range	-65℉ to 250℉
Compensated temperature range	60℉ to 160℉
Over-range capacity	<=750 psi = 1500psi 2000 to 3000 psi = 100% F.S. >=5000psi = 50% F.S.
Line pressure(maximum)	<=750 psi = 1500psi >=2000 psi = 2000psi
Major construction material	17-4PH stainless steel
Port material	17-4PH stainless steel
Mating connector	SEN1005 (PT0A-10-6S (or equivalent))

Options and accessories

Amplifiers
Panel meter