Model RM Tension Load Cell

Stainless steel
High Range
Infinite resolution

A load cell or force sensor is a device which converts load or force into an electrical signal.

A tension load cell measures the tension force applied between the top and bottom mounting threads.

Care should be taken to ensure that the load sensor is not exposed to load or force in excess of its capability. The range of tension load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.

This series of transducer is a strain gauge type transducer and has a mV output which may require an amplifier. We can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

How it Works - Strain Gauge Load Cell

Type D1 L1 L2
AL413 38mm 66mm See table
AL415 44mm 66mm See table
AL417 64mm 77mm See table
AL411 (75k & 100k lbs) 89mm 102mm See table
AL411 (150k & 200k lbs) 114mm 127mm See table

To order this product please specify range, type and thread size
Type Thread options 1/2-20 3/4-16 7/8-14 1-14 1-1/2-12 2-1/2-12 UN 3-1/2-8 UNF
L2 24mm 24mm 24mm 32mm 38mm 76mm 102mm
SLC-RM-002000 2000lbs (9kN) AL413 AL413 AL413        
SLC-RM-003000 3000lbs (13kN) AL413 AL413 AL413        
SLC-RM-004000 4000lbs (18kN) AL413 AL413 AL413        
SLC-RM-005000 5000lbs (22kN) AL413 AL413 AL413        
SLC-RM-007500 7500lbs (33kN)   AL415 AL415 AL415 AL417    
SLC-RM-010000 10000lbs (44kN)   AL415 AL415 AL415 AL417    
SLC-RM-015000 15000lbs (67kN)   AL415 AL415 AL415 AL417    
SLC-RM-020000 20000lbs (89kN)     AL415 AL415 AL417    
SLC-RM-030000 30000lbs (133kN)         AL417    
SLC-RM-050000 50000lbs (222kN)         AL417    
SLC-RM-075000 75000lbs (334kN)           AL411  
SLC-RM-100000 100000lbs (445kN)           AL411  
SLC-RM-150000 150000lbs (667kN)             AL411
SLC-RM-200000 200000lbs (890kN)             AL411


Excitation/supply (acceptable)0 to 15V (ac or dc) Temperature coefficient (span) ±0.01% rdg /C
Excitation/supply (calibrated)10Vdc Operating temperature range (minimum) -54C
Output2mV/V Operating temperature range (maximum) 121C
Bridge resistance350 Ohms Compensated temperature range (minimum) 16C
Linearity error<= 50k lbs = ±0.15% F.S.
>=75k lbs = ±0.2% F.S.
Compensated temperature range (maximum) 71C
Hysteresis<= 50k lbs = ±0.15% F.S.
>=75k lbs = ±0.2% F.S.
Deflection at full scale 0.1mm maximum
Repeatability±0.05% F.S. Over-range capacity 50% F.S.
ResolutionInfinite Major construction material stainless steel
Temperature coefficient (zero)±0.009% F.S. /C Electrical termination <= 50k lbs = Connector, mating part = PT0A-10-6S (or equivalent) (SEN1005)
>=75k lbs = Connector, mating part = MS3106A-14S-6S (or equivalent) (SEN1006)

Options and accessories


All dimensions and specifications are nominal. 20170119
Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment.
UK Head Office
RDP Electronics Ltd
Grove Street, Heath Town
Wolverhampton, West Midlands, WV10 0PY
United Kingdom
Tel: +44 1902 457512
Fax: +44 1902 452000
Registered in England No. 1688591