Model LFH-7i Compression Load Cell

Miniature

Stainless steel

Infinite resolution

image of Model LFH-7i Compression Load Cell

Our SLC-LFH7I load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC-LFH7I load cell should be mounted on a hard, flat surface. This compression load cell measures the compressive force applied between the top and bottom of the load cell.
Care should be taken to ensure that the model SLC-LFH7I load sensor is not exposed to load or force in excess of its capability. The range of model SLC-LFH7I compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC-LFH7I transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC-LFH7I we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

Compression Load Cell

Our SLC-LFH7I compression load cell measures the force applied to the load button.

Type	Range	D1	H	D2	H2
SLC-LFH7I00250	250lbs	0.50''	0.38''	0.27''	0.13''
SLC-LFH7I00500	500lbs	0.50''	0.38''	0.28''	0.13''
SLC-LFH7I01000	1klbs	0.50''	0.38''	0.31''	0.13''
SLC-LFH7I02000	2klbs	0.50''	0.38''	0.41''	0.13''
SLC-LFH7I03000	3klbs	0.50''	0.38''	0.45''	0.13''
SLC-LFH7I05000	5klbs	0.63''	0.60''	0.53''	0.23''
SLC-LFH7I07500	7.5klbs	0.88''	0.63''	0.63''	0.54''
SLC-LFH7I10000	10klbs	0.88''	0.63''	0.63''	0.54''

Specification

Excitation/supply (calibrated)	5Vdc
Bridge resistance	350 Ω
Accuracy	±0.70% F.S.
Resolution	Infinite
Temperature coefficient (zero)	±0.010% F.S. /℉
Temperature coefficient (span)	±0.010% rdg /℉
Operating temperature range	-65℉ to 250℉
Compensated temperature range	60℉ to 160℉
Deflection at full scale	0.04'' maximum
Over-range capacity	50% F.S.
Major construction material	stainless steel
Electrical termination	5ft (integral cable)

Options and accessories

Amplifiers
Panel meter