Model 47 Tension/Compression Universal Load Cell

Very high accuracy

Stainless steel

High overload capacity

Infinite resolution

Fatigue rated

image of Model 47 Tension/Compression Universal Load Cell

Our SLC47 load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC47 load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC47 load sensor is not exposed to load or force in excess of its capability. The range of model SLC47 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC47 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC47 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

Tension/Compression Universal Load Cell

Tension/compression load cells measure the force applied to the centre threads of the load cell.

A=0.82''

B=1.00''

Connector sold separately

Type	Range	D1	H	Centre thread	D2	H2	D3	Linearity error (% F.S.)	Hysteresis	Accuracy
SLC47/000250	250lbs	4.12''	2.49''	5/8-18 UNF-3B	1.34''	0.12''	1.25''	±0.02% F.S.	±0.02% F.S.	±0.02% F.S.
SLC47/000500	500lbs	4.12''	2.49''	5/8-18 UNF-3B	1.34''	0.12''	1.25''	±0.02% F.S.	±0.02% F.S.	±0.02% F.S.
SLC47/001000	1klbs	4.12''	2.49''	5/8-18 UNF-3B	1.34''	0.12''	1.25''	±0.02% F.S.	±0.02% F.S.	±0.02% F.S.
SLC47/002500	2.5klbs	4.12''	2.49''	5/8-18 UNF-3B	1.34''	0.12''	1.25''	±0.03% F.S.	±0.04% F.S.	±0.03% F.S.
SLC47/005000	5klbs	4.12''	2.49''	5/8-18 UNF-3B	1.34''	0.12''	1.25''	±0.03% F.S.	±0.04% F.S.	±0.03% F.S.
SLC47/012500	12.5klbs	6.06''	3.50''	1-1/4-12 UNF-3B	2.65''	0.12''	2.25''	±0.04% F.S.	±0.05% F.S.	±0.04% F.S.
SLC47/025000	25klbs	6.06''	3.50''	1-1/4-12 UNF-3B	2.65''	0.12''	2.25''	±0.04% F.S.	±0.05% F.S.	±0.04% F.S.
SLC47/050000	50klbs	8.00''	4.50''	1-3/4-12 UNF-3B	3.76''	0.25''	3.00''	±0.04% F.S.	±0.05% F.S.	±0.04% F.S.
SLC47/100000	100klbs	11.00''	6.50''	2-3/4-8 UNF-3B	4.81''	0.50''	4.50''	±0.05% F.S.	±0.05% F.S.	±0.05% F.S.

Specification

Excitation/supply (acceptable)	0 to 20Vdc
Excitation/supply (calibrated)	10Vdc
Output	2mV/V
Bridge resistance	350 Ω (SLC47/000250 = 700 Ω)
Repeatability	±0.01% F.S.
Temperature coefficient (zero)	±0.0008% F.S. /℉
Temperature coefficient (span)	±0.0008% rdg /℉
Operating temperature range	-65℉ to 200℉
Compensated temperature range	30℉ to 130℉
Fatigue life (nominal)	100,000,000 low frequency sinusoidal reversals
Deflection at full scale	0.0025'' maximum
Over-range capacity	±100% F.S.
Major construction material	Stainless steel
Mating connector	SAD-AA162 (PC06A-10-6S (or equivalent))

Options and accessories

Amplifiers
Panel meter