RDP Home Page Banner

DR7DC DIN Rail Mounting Amplifier

Strain gauge transducer amplifier
DIN rail mounting Amplifier
Voltage / 4-20mA output
Infinite resolution
image of DIN rail mounting Amplifier type DR7DC
The DR7 is a DIN rail mounting amplifier designed to install in suitable cabinets along with other similar devices.
To reduce electrical noise, system problems and the risk of accidental damage the DR7 has full isolation between supply and output.
A wide supply voltage tolerance and selectable excitation ensure that the DR7 is compatible with a very wide selection of transducers and applications.
dimensional drawing of LVDT amplifier S7AC
Supply voltage (Vs) 9V to 36Vdc, 120mA typical
Output 1 0 to 10V, 5mA (isolated)
Output 2 ±10V, 5mA (isolated)
Output 3 4-20mA (loop resistance 100 Ω to 500 Ω) (isolated)
Output ripple 5mV rms typical
Output ripple (4-20mA output) 20uA rms typical
Analogue output bandwidth 5k/500/20Hz(user selectable)
Signal input range 0.004V to 10V
Amplifier gain range 1 to 1250
Transducer excitation 3V to 10V 100mA,(user selectable)
Linearity error ±0.02% F.S.
Temperature coefficient (combined zero and span) ±0.006% F.S. /℉ minimum
Operating temperature range 14℉ to 140℉
Total weight 4.6oz