Model 34 Tension/Compression Universal Load Cell

Stainless steel

Infinite resolution

Miniature

image of Model 34 Tension/Compression Universal Load Cell

Our SLC34 load cell or force sensor is a device which converts load or force into an electrical signal.
Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC34 load sensor is not exposed to load or force in excess of its capability. The range of model SLC34 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
One particular feature of this transducer is its very small size
The SLC34 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC34 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

Miniature tension compression load cell

Tension/compression load cells measure the force applied to the centre threads of the load cell.

dimensional drawing of Model 34 Tension/Compression Universal Load Cell

The cable may contain an in-line circuit board which cannot be removed

CL1=2ft (nominal)

CL4=1'' (nominal)

AF=3/8''

Mounting thread=1/4-28 UNF

Type	Range	D1	H	L1	L2	A	B	Total weight
SLC34G1000	1000grams (2.2lbs)	0.75''	1.75''	0.60''	0.72''	0.31''	0.19''	1.4oz
SLC34/0005	5lbs	0.75''	1.75''	0.60''	0.72''	0.31''	0.19''	1.4oz
SLC34/0010	10lbs	0.75''	1.75''	0.60''	0.72''	0.31''	0.19''	1.4oz
SLC34/0025	25lbs	1.00''	1.75''	0.52''	0.72''	0.50''	0.25''	2.8oz
SLC34/0050	50lbs	1.00''	1.75''	0.52''	0.72''	0.50''	0.25''	2.8oz
SLC34/0100	100lbs	1.00''	1.75''	0.52''	0.72''	0.50''	0.25''	2.8oz
SLC34/0250	250lbs	1.00''	2.00''	0.75''	0.75''	0.50''	0.25''	3.5oz
SLC34/0500	500lbs	1.00''	2.00''	0.75''	0.75''	0.50''	0.25''	3.5oz
SLC34/1000	1klbs	1.00''	2.00''	0.75''	0.75''	0.50''	0.25''	3.5oz

Specification

Excitation/supply (calibrated)	5Vdc
Output	≈2mV/V.
Linearity error	≤250lbs=±0.15% F.S., ≥500lbs=±0.2% F.S.
Hysteresis	≤250lbs=±0.15% F.S., ≥500lbs=±0.2% F.S.
Repeatability	1kg=±0.1% F.S., ≥5lbs=±0.05% F.S.
Temperature coefficient (zero)	±0.005% F.S. /℉
Temperature coefficient (span)	±0.005% F.S. /℉
Operating temperature range	-65℉ to 250℉
Compensated temperature range	60℉ to 160℉
Deflection at full scale	0.002'' maximum
Over-range capacity	50% F.S.
Major construction material	17-4 PH stainless steel
Electrical termination	5ft (integral cable)

Options and accessories

Amplifiers
Panel meter