Model 73 Compression Load Cell

High accuracy

High overload capacity

Stainless steel

Infinite resolution

Fatigue rated

The SLC73 load cell should be mounted on a hard, flat surface. Our SLC73 compression load cell measures the force applied to the load button.
Care should be taken to ensure that the model SLC73 load sensor is not exposed to load or force in excess of its capability. The range of model SLC73 compression load cell selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC73 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC73 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

Compression Load Cell

Our SLC73 compression load cell measures the force applied to the load button.

Connector sold separately

H2=0.18''

Connector housing	A	B	C
5lbs to 5klbs	0.82''	0.75''	1.25''
7.5klbs to 500klbs	1.25''	1.50''	2.0''

Type	Range	D1	H	E	PCD	D2
SLC73/000050	50lbs	3.0''	1.18''	1/4	2.250''	0.56''
SLC73/000100	100lbs	3.0''	1.18''	1/4	2.250''	0.56''
SLC73/000250	250lbs	3.0''	1.18''	1/4	2.250''	0.56''
SLC73/000500	500lbs	3.0''	1.18''	1/4	2.250''	0.56''
SLC73/001000	1klbs	3.5''	1.18''	5/16	2.625''	0.69''
SLC73/002000	2klbs	3.5''	1.18''	5/16	2.625''	0.69''
SLC73/003000	3klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/004000	4klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/005000	5klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/007500	7.5klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/010000	10klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/015000	15klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/020000	20klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/030000	30klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/050000	50klbs	4.5''	2.00''	3/8	3.790''	1.50''
SLC73/075000	75klbs	5.5''	2.18''	3/8	4.812''	2.00''
SLC73/100000	100klbs	5.5''	2.18''	3/8	4.812''	2.00''
SLC73/150000	150klbs	7.5''	2.68''	3/8	6.750''	2.50''
SLC73/200000	200klbs	7.5''	2.68''	3/8	6.750''	2.50''

Specification

Excitation/supply (calibrated)	10Vdc
Output	2mV/V
Bridge resistance	350 Ω
Linearity error	±0.1% F.S.
Hysteresis	±0.1% F.S.
Repeatability	±0.03% F.S.
Temperature coefficient (zero)	±0.002% F.S. /℉
Temperature coefficient (span)	±0.002% F.S. /℉
Operating temperature range	-65℉ to 250℉
Compensated temperature range	60℉ to 160℉
Fatigue life (nominal)	1000000000
Deflection at full scale	0.006'' maximum
Over-range capacity	100% F.S.
Major construction material	stainless steel
Mating connector	<=2000 lbs = SEN1005 (PT0A-10-6S (or equivalent)) >=3000 lbs = SEN1006 (MS3106A-14S-6S (or equivalent))

Options and accessories

Amplifiers
Panel meter