RDP Home Page Banner

Model 75 Tension/Compression Universal Load Cell

High accuracy
Stainless steel
Infinite resolution
Fatigue rated
image of Model 75 Tension/Compression Universal Load Cell
Our SLC75 load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC75 load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC75 load sensor is not exposed to load or force in excess of its capability. The range of model SLC75 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC75 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC75 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.
Tension/Compression Universal Load Cell
Tension/compression load cells measure the force applied to the centre threads of the load cell.
dimensional drawing of Model 41 Tension/Compression Universal Load Cell
Connector sold separately
Connector housing A B C
5lbs to 2klbs 0.82'' 0.75'' 1.25''
3klbs to 150klbs 1.25'' 1.50'' 2.0''
200klbs 1.25'' 1.50'' ?
Type Range D1 H E PCD Centre thread
SLC75/000050 50lbs 3.0'' 1.0'' 0.28'' X6 2.250'' 3/8-24 UNF
SLC75/000100 100lbs 3.0'' 1.0'' 0.28'' X6 2.250'' 3/8-24 UNF
SLC75/000250 250lbs 3.0'' 1.0'' 0.28'' X6 2.250'' 3/8-24 UNF
SLC75/000500 500lbs 3.0'' 1.0'' 0.28'' X6 2.250'' 3/8-24 UNF
SLC75/001000 1klbs 3.5'' 1.0'' 0.34'' X6 2.625'' 1/2-20 UNF
SLC75/002000 2klbs 3.5'' 1.0'' 0.34'' X6 2.625'' 1/2-20 UNF
SLC75/003000 3klbs 5.5'' 1.8'' 0.40'' X8 4.500'' 1-14 UNS
SLC75/004000 4klbs 5.5'' 1.8'' 0.40'' X8 4.500'' 1-14 UNS
SLC75/005000 5klbs 5.5'' 1.8'' 0.40'' X8 4.500'' 1-14 UNS
SLC75/007500 7.5klbs 5.5'' 1.8'' 0.40'' X8 4.500'' 1-14 UNS
SLC75/010000 10klbs 6.0'' 1.8'' 0.53'' X8 4.875'' 1-1/2-12 UN
SLC75/015000 15klbs 6.0'' 1.8'' 0.53'' X8 4.875'' 1-1/2-12 UN
SLC75/020000 20klbs 6.0'' 1.8'' 0.53'' X8 4.875'' 1-1/2-12 UN
SLC75/030000 30klbs 7.5'' 2.0'' 0.78'' X8 6.000'' 2-12 UN
SLC75/050000 50klbs 7.5'' 2.0'' 0.78'' X8 6.000'' 2-12 UN
SLC75/075000 75klbs 9.0'' 2.5'' 0.66'' X12 7.750'' 2-1/2-12 UN
SLC75/100000 100klbs 9.0'' 2.5'' 0.66'' X12 7.750'' 2-1/2-12 UN
SLC75/150000 150klbs 14.0'' 4.25'' 1.03'' X12 11.750'' 3-1/2-8 UN
SLC75/200000 200klbs 14.0'' 4.25'' 1.03'' X12 11.750'' 3-1/2-8 UN
Specification
Excitation/supply (calibrated) 10Vdc
Output 2mV/V
Bridge resistance 350 Ω
Linearity error ±0.1% F.S.
Hysteresis ±0.1% F.S.
Repeatability ±0.03% F.S.
Temperature coefficient (zero) ±0.002% F.S. /℉
Temperature coefficient (span) ±0.002% rdg /℉
Operating temperature range -65℉ to 250℉
Compensated temperature range 60℉ to 160℉
Fatigue life (nominal) 100000000
Deflection at full scale 0.0060'' maximum
Over-range capacity 100% F.S.
Major construction material stainless steel
(≥125k lbs = carbon steel)
Mating connector <=2000 lbs = SEN1005 (PT0A-10-6S (or equivalent))
>=3000 lbs = SEN1006 (MS3106A-14S-6S (or equivalent))
Options and accessories
Amplifiers Amplifier option thumbnail
Panel meter Panel meter option thumbnail